Audio enhancer

Make a voice recording sound clean, clear and properly loud: noise removal, voice EQ, gentle compression and podcast loudness (−16 LUFS). Free in your browser.

AudioRinse · voice cleanerOn-device · 0 B uploaded

Drop audio or video here

MP3 · WAV · M4A · MP4 · MOV · WEBM — up to 60 min. Nothing is uploaded.

How it works

  1. Drop your recording onto the box above.
  2. AudioRinse removes the noise, then shapes the voice: rumble cut, clarity boost, gentle compression.
  3. It sets the loudness to the podcast standard (−16 LUFS), so it sounds right next to other shows; or pick YouTube (−14 LUFS), or keep the recording's own level.
  4. Compare, adjust the strength, and download.

Before / after

Hear it before you drop anything

“After” is AudioRinse at its default settings. The voice is synthetic, so we can share it freely.

This recording was made thin and quiet, like a phone on a table.

What the enhancer does, step by step

  • Removes background noise with the same speech model as the noise remover.
  • Cuts low rumble below 80 Hz: traffic, desk bumps, air-conditioning drone.
  • Takes a little out around 300 Hz, where small rooms make a voice sound boxy.
  • Adds a little presence around 3.5 kHz, where consonants live, so words are easier to follow.
  • Evens out loud and quiet passages with gentle compression.
  • Sets the loudness to −16 LUFS with peaks kept under −1 dB, the level Apple recommends for podcasts. For YouTube pick −14 LUFS; for audio that goes back under a video or into a mix, keep the recording's own level.

When to use it

Use the enhancer when the recording will be heard on its own: a podcast episode, a voice-over, a lecture, a narration. If you'll mix the voice with music or other tracks in an editor, use Remove background noise instead and leave tone and level for the mix.

The strength slider sets how much noise is removed. The tone and loudness steps always apply, so even at a low strength the voice comes out clearer and at a steady level.

What it can't fix

Distortion from recording too loud (clipping), a voice that drops out on a bad connection, and heavy room echo. For echoey rooms, Remove reverb does a better job.

Questions

Is my recording uploaded anywhere?

No. AudioRinse runs the cleaning model inside your browser, on your own computer. Your file never leaves your device, so there's no upload to wait for and nothing stored on a server.

What does the enhancer actually do?

Four steps: removes background noise, cuts low rumble and boxy 'mud', adds a little presence so speech is clearer, then evens out and normalises the loudness with a −1 dB peak ceiling: −16 LUFS by default, the level Apple recommends for podcasts, or −14 for YouTube, or as loud as the original recording.

How is it different from Remove Background Noise?

That tool only removes noise and leaves the voice as recorded. The enhancer also fixes tone and loudness, which is what you want for a podcast or a video voice-over.

Is it free?

Cleaning and listening are free and unlimited. You get 3 free downloads a month for audio files up to 10 minutes (1 without an account). Pro adds unlimited downloads, files up to 1 hour and video.

Other tools